Response CWFK1/CA3 Operations Instructions

Wireless Colour CameraCCTV System CWFK1/CA3Installation and Operating InstructionsThese instructions should be retained in a safe place for future ref

4.4 Setting the Receiver Channel (Optional)The wireless receiver is capable of receiving up to 4 separate channels. The front of thewireless receiver

11- dense materials such as concrete or metal will impede the wireless signal; move thecamera and/or receiver away from dense materials. A metal radia

12TROUBLE SHOOTING Section 5PROBLEM SOLUTIONI can’t see the Camera Ensure the camera and receiver are plugged in.on my TV and the TV/VCR/DVR is tuned

13TECHNICAL SPECIFICATION Section 6ITEM WIRELESS CAMERAImage sensor 1/3” CMOSPixel resolution PAL: 628 x 582NTSC: 510 x 492380 TV linesLens size 6mmVi

14ACCESSORIES IN THE RANGE Section 7There are a range of accessories available in the Response CCTV product range to expandyour system:CWK1 Wired Colo

15DISPOSAL – RECYCLING INSTRUCTIONSSection 8Directive (2002/96/EC)This product is classified by the Waste Electrical or ElectronicEquipment (WEEE) Dir

GUARANTEE Section 9Novar ED&S undertakes to replace or repair at its discretion goods (excluding nonrechargeable batteries) should they become def

21 INTRODUCTION 32 KIT CONTENTS 43 INSTALLATION 53.1 Direct Connection of the Receiver to the TV 53.2 Connection of the Receiverto a VCR / DVR 63.3 Wi

3INTRODUCTION Section 1The Response Wireless Colour Camera CCTV System is a monitoring system designedto help protect your home or office.SAFETY AND I

4KIT CONTENTS Section 2CWFK1:1 xWireless Colour Camera 1xWireless Receiver unit1xVideo output cable for wireless receiver to TV1xWireless Camera power

5INSTALLATION Section 33.1 Direct Connection of the Receiver to the TV1. Connect the video cable and power adaptor’s output plug into the receiver.2.

63.2 Connection of the Receiver to a VCR/DVR1. Connect the video cable and power adaptor’s output plug into the receiver.2. Connect the other end of

73.3 Wireless Camera InstallationMount the camera in a selected location using the fixing screws and plugs supplied. If thecamera is installed outdoo

8The sun shade hood can be removed from the camera body and re-attached for installationflexibility. This is done by sliding along the body of the cam

93. Turn ON your TV and VCR or DVR.4. Playback a tape on the VCR or recorded video on the DVR to confirm your TV is onthe correct channel.5. Tune the